Length: 1.5m

Cable: High quality black ethernet cable with Snagless RJ45 and 5pin connector

Works with: Model S/X 2012-2016

P/N: 1013230-00-A

tesla fakra lan wire looks like this

Connect the Fakra power cable to the laptop

Configure the network address of the wired adapter

you need to register the ip address 192.168.90.101 and 255.255.0.0 . mask

Go to Network and Sharing Center

Change adapter settings

Right click properties

you need to register the ip address 192.168.90.101 and 255.255.0.0 . mask

OK button

Run the Git Bash program and check Ping 192.168.90.100

ip address 192.168.90.100 should be pinged

only after the ping was successful can you run commands

only after the ping was successful can you run the commands:

copy and paste into the Git Bash program with the right mouse button

Factory mode command

curl -vX POST http://192.168.90.100:4070//_data_set_value_request_ -d '{ "name" : "GUI_factoryMode", "value" : "true" }' --header "Content-Type: application/json" - A "Models/1.0"}

this is old code

it works on older firmware

for new firmware new code:

1) download git bash
https://git-scm.com/download/win

2) buy Lunar Private script

3) extract the 7zip archive
from 4) copy the tesla.sh script to send C to the tesla directory

5) Running the script is very easy
6) right click select run via git bash
7) press button 1 and ENTER

Your car is in factory mode

After successfully entering the factory, you can build a dashboard and add an extra LAN. to use

model before restyling (left of driver's door)

this interface only works after factory activation

restyling models (below under the big screen cover)

this interface only works after factory activation

Model S/X

before entering factory mode, we use the LAN port behind the small screen

after entering the factory mode, use the LAN port on the left side of the driver's door

Model S/X RESTYLING

use the LAN port behind the small screen

before entering factory mode, please use the LAN port from under the MCU

Double-click to launch the Tesla Toolbox shortcut from the desktop

The program automatically connects to your car and writes the firmware version